Grow Rack · Grow Room · Updates

My Indoor Grow Room Project Part One

Hi folks. For the past several weeks I’ve been planning an indoor basement grow room to kick off 2016. I created this thread to post pictures & document my progress with this build.

Room Specs:
The area is roughly 12 feet long x 7.5 feet wide. Ceiling height is about 78 inches, 72 inches underneath a couple of floor support beams. I live in Zone 5. The basement has a very nice french drain & sump pump. I have a dehumidifier that drains directly into the sump. The previous homeowners ‘dryloked’ the basement, so I am aware that there is a buildup of salts, minerals, and mold in the picture below. In the middle of winter the nighttime basement temps never dip below 50-55 degrees Fahrenheit.

Purpose of the Room:
This room is intended as the catch-all for my plant obsession. I don’t have much room in front of my more well-lit windows in my house. Some of my non-carnivorous plants are currently crammed in front of the windows, fighting for space, are an eyesore and at times get in my way. I’m planning to fill the room with carnivorous plants of all flavors, in addition to any other plant that finds its way into my collection (Tillandsia, Orchids, Ant Plants, Bromeliads, Tubs of Sphagnum Moss, African Violets, etc. you get the point!!). I also plan to set aside a bit of space to over-winter some of the plants that I grow outdoors in the summer, such as Meyer Lemon trees, etc. This room will also be used for plant propagation; but I will have a repotting station located outside of the room in the basement so I can try to keep the room neat & tidy. Last but likely not least…I’m planning to have enough space for a small folding table and 1-2 comfortable folding camping chairs (or those awesome plastic Adirondack chairs) to relax and enjoy my morning coffee, and an evening alcoholic beverage whenever I feel like it.  When planning your growing space, don’t forget to incorporate plans for you to be able to ENJOY your collection!

The Plan:
My plan is to clean the basement wall & floor, removing as much of the mold and salt/mineral buildup as I can. After that my plan is to construct 4 framed walls with pressure treated lumber. Only 1 of the framed walls will be touching the basement wall, and I will be using special material to insulate the basement wall from the frame to allow the wall to breathe while protecting my frame from moisture. I will also be framing out a door. I decided not to drylok the basement wall as I’ve read many sourcesciting it as the direct cause for mold problems down the line as it prevents the wall from breathing. My basement is kept in good condition by the sump pump & dehumidifier. Next my plan is to install a moisture resistant drywall to the interior wood frame & ceiling, and tape all the seams & screw holes. At this point I will also install some ceiling ventilation ducting to remove excess heat & humidity and channel it into the main basement; most of which will be dealt with by my dehumidifier. After this, the wall & ceiling seams will be sanded. Finally I will then cover the walls and ceiling with several coats of a waterproofing paint for good measure. The paint I use will be flat, bright white, as I’ve read that this would give me a highly reflective surface. I will likely leave the basement floor alone for now, but will give it a good cleaning. Eventually I’ll get around to covering the frame on the outside of the room, likely with just some OSB plywood type material and give it a couple coats of whichever water resistant color paint I choose. From here on out my plan is to fill the room with adjustable grow racks, lights, and tables in varying arrangements to suit the needs of the plants. I hope to slowly grow into this space and make a nice, warm, humid environment for my plants (and for me to enjoy my plants!). I’ll be monitoring my day/evening conditions daily and make adjustments as needed; for example, more/less ventilation, oscillating fans, humidifier/hydrofogger, etc. I think that being such a closed system, the fluorescent lighting alone will produce sufficient heat for the system. Wish me luck!

23856792150_605ebd965b_z

In my opinion the most important piece of equipment for any grow room…

24070638011_4b23703162_z

Advertisements

One thought on “My Indoor Grow Room Project Part One

  1. Oh man, big project. It’ll be great once you get it all going though! Keep in mind that most carnivores like fairly cool conditions – lowland Nepenthes and petiolaris Drosera are the exceptions. If you can keep the temperatures between like 70 and 55 that’s probably the sweet spot for the vast majority of the plants one is likely to grow. I don’t know much about basements (we don’t really have them in California), but the temps should be pretty stable in there I imagine.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s